Copyright 2025 by Reso Engineering Sdn Bhd
 
 
 
Mobile :: Sub Masthead
Industrial Effluent Treatment System (IETS) Industrial Effluent Treatment System (IETS)
 

Are You Facing These?

I am opening a new business and I would like to take care of my wastewater
I am opening a new business and I would like to take care of my wastewater
 
I have wastewater from production but no treatment system
I have wastewater from production but no treatment system
 
I want to build a waste water treatment plant
I want to build a waste water treatment plant
 
I have a WWTP but the water seems doesn’t meet the DOE requirement
I have a WWTP but the water seems doesn’t meet the DOE requirement
 
My WWTP is having problems on its equipment
My WWTP is having problems on its equipment
 
DOE have issued a summon to my factory because of my waste water
DOE have issued a summon to my factory because of my waste water
 
I have a WWTP but my staff spends too much of time at the WWTP
I have a WWTP but my staff spends too much of time at the WWTP
 
I want to hire a new engineer to take care of my WWTP but how can he get trained?
I want to hire a new engineer to take care of my WWTP but how can he get trained?
 
I want to do servicing to my WWTP but it is so troublesome
I want to do servicing to my WWTP but it is so troublesome
 
Through our decades of experience in Industrial Effluent Treatment System (IETS), a comprehensive solution towards handling your effluent issue is what Reso Engineering capable of. Our services includes,
 
Consultation & existing system auditing
 
Industrial Effluent Characteristic Study (IECS)
 
Effluent treatability study
 
Environmental Quality (Industrial Effluents) Regulations 2009 Written Notification
 
Wastewater treatment plant operate and manage
 
Wastewater treatment plant design
 
Wastewater treatment plant fabrication and installation
 
Wastewater treatment plant’s Parts and equipment supply
 
WWTP competent person guiding and training
 
WWTP equipment servicing
 

Whole Industrial Effluent Treatment System (IETS) Set-up

Effluent (wastewater) generated by a factory/ plant needs to comply with the regulation set by the Department of Environment (DOE)
The IETS aim to treat non-complying wastewater by removing or control components that exceed the guideline set by the DOE before releasing it to the public drain
 
Step 1
Solid Screening
Next
Step 2
Equalization
Next
Step 3
Chemical Reaction
Next
Step 4
Solid Liquid Separation
Next
Step 5
Biological/ Aeration
Next
Step 6
Water Polishing
Next
Step 7
Discharge/ Reuse
 
Whole Industrial Effluent Treatment System (IETS) Set-up
 

Consultation of Existing WWTP and Auditing

Detailed survey on the IETS (search for source of problem)
 
Identify type of waste
 
Come out with findings from the survey
 
Provide with direction to cater problem rose
 
Conduct treatability study with complete report
 

Built, Operate and Manage (Outsourcing Management)

Reso undertakes on design, constructing, operate and manage of the wastewater treatment plant
 
Identify type of waste
 
We will be stationed at the WWTP to operate and manage it
 
Factories shall focus on what they do best, production of products
 
A study done by our in-house lab professional to ensure wastewater treatment plant to be invested shall perform according to their needs
 
The right procedures and scale of procedures
 
Step 1
Oil separation
Next
Step 2
Type and amount of chemical dosage
Next
Step 3
Aeration time
Next
Step 4
Filtration and etc would be integrated
 
The full study is recorded and documented for the use of future reference by clients
 
Raw Wastewater
Raw Wastewater
 
Partially Treated Wastewater
Partially Treated Wastewater
 
Fully Treated Wastewater
Fully Treated Wastewater
 

Industrial Effluent Characteristic Study (IECS) Required by DOE

Working with our strategic partner, a 3 days wastewater generation study from a factory shall be conducted. A study to determine,
 
Waste Water Chemistry
Properties of waste water
 
Waste Water Flow Rate
Waste water generation from production facility
 
Waste Water Flow Pattern
Flow pattern of waste water generated
Example 2m3 at 10am, 4m3 at 4pm
 

WWTP Competent Person Guiding and Training

Reso is experienced in training staff from basic to advance knowledges in order to be a well-equipped competent person for WWTP. Training exposes the staff to,
 
WWTP important theoretical knowledge
 
Highly practical on-site skills to manage the WWTP
 
DOE Wastewater compliances to be taken care of
 

WWTP Equipment Servicing

Filter media replacement
 
Overall tank cleaning
 
Equipment’s wear and tear parts replacement
 
Gearing oil replacement
 
Air Pollution Control System (APCS) Air Pollution Control System (APCS)
 

Are You Facing These?

I am opening a new business and I would like to take care of my wastewater
My production is not having any air pollution control system
 
I have wastewater from production but no treatment system
There are many dusts flying around my factory
 
I want to build a waste water treatment plant
There are fumes/ smell from gasses around my factory
 
I have a WWTP but the water seems doesn’t meet the DOE requirement
DOE asked me to install an air pollution control system
 
My WWTP is having problems on its equipment
I have an air pollution control system but there is still dust around my factory
 
DOE have issued a summon to my factory because of my waste water
I was summoned by DOE
 
I have a WWTP but my staff spends too much of time at the WWTP
I want to comply with DOE on air pollution control but I do not know how
 
Reso Engineering provides a total solution towards your particular needs on air pollution control where our services include,
 
Consultation & existing system auditing (For improvement and upgrading)
 
Environmental Quality (Clean Air) Regulations 2014 Written Notification Submission
 
Air Pollution Control System design
 
Air Pollution Control System fabrication and installation
 
Air Pollution Control System’s parts and equipment supply
 
Air Pollution Control System performance monitoring devices supply and install
 

Air Pollution Control System(APCS) Products

Chimney and Ducting  
 
Treated flue gasses that complies with DOE’s requirement shall be channeled to the atmosphere through a chimney
Duct and chimney shall be fabricated with materials that suit the system, example painted mild steel, galvanized iron(GI), stainless steel, FRP, PP and PVC
 
Chimney and Ducting
 
Chimney and Ducting
 
Scrubber System  
 
Spraying Tower
 
Spraying Tower
Uses water or scrubbing liquid
Stick on dust or particulates from flue gas
Great to trap particulates from flue gas with high temperatures when WWTP is available
 
Packed Column
 
Packed Column
Uses water or scrubbing liquid
Stick on particulates or neutralizes contaminants with unneutral Ph
Has the assistance of packings to increase contact time
High efficiency in separating volatile fumes/compounds with unneutral pH from flue gas when WWTP is available
 
Venturi Scrubber
 
Venturi Scrubber
Similar to spraying tower with an additional feature of venturi chamber
Increases flue gas velocity to improve gas-liquid contact
Highly efficient in treating flue gasses with high loading of particulates and volumetric flow rate when WWTP is available
 
Orifice Scrubber
 
Orifice Scrubber
Uses a water bath to trap particulates and fumes from flue gas
Very efficient in treating flue gasses with high loading of particulates when WWTP is available
 
Cyclone & Multicyclone  
 
Acts as a pre-liminary contaminant separator by using vortex separation
Reduces the load of next APCS stage(s)
Suitable for flue gasses with high temperature
 
Cyclone
 
Multicyclone
 
Dust Collector  
 
Acts as a pre-liminary contaminant separator by using vortex separation
Reduces the load of next APCS stage(s)
Suitable for flue gasses with high temperature
 
Dust Collector
 
Bag Filter
 
Cartridge Filter
 
Electrostatic Precipitator  
 
Remove impurities solid from flue gasses using electric charge
Very efficient in catering high flue gas volume at a low pressure drop
High durability
Does not require WWTP
 
Electrostatic Precipitator
 
Electrostatic Precipitator
Copyright 2025 by Reso Engineering Sdn Bhd
Google Site Search